K+M Carbide Cutting Pilot w/Flutes, 28/7MM Calibre Die Style_Bushing Full Length Sizer Dies The thicker 0

The thicker 0

The HD-3 Tall Tripod from BOGgear is an adjustable three section tripod with rotating shooting rest

Barnes’ Banded Solids™ stop dangerous game right now

Install pre-set metering units by simply pushing the button on the outside of the metering chamber

You can backpack the AIM 60 and carry the weight of your gun and all the extras comfortably over long distances

K+M Carbide Cutting Pilot w/Flutes, 28/7MM Calibre Die Style_Bushing Full Length Sizer Dies The thicker 0This finely ground carbide cutting pilot, designed for use with the K+M case neck turning body, has four cutting flutes used to remove the doughnut that can form at the inside neck wall and shoulder junction. If you are noticing the formation of a doughnut, this tool will remove the excess material without affecting inside neck diameter allowing for uniform bullet seating and eliminate powder gas restriction. There is also less friction between brass